立体声驱动器
出处：94179411 发布于：2008-06-17 00:00:00 | 1538 次阅读
This preamplifier has a low output impedance, and is designed to drive long cables, allowing you to listen to a remote music source without having to buy expensive screened cables. The very low output impedance of around 16 ohms at 1KHz, makes it possible to use ordinary bell wire,loudspeaker or alarm cable for connection. The preamplifier must be placed near the remote music source, for example a CD player. The cable is then run to a remote location where you want to listen. The output of this preamp has a gain of slightly less than one, so an external amplifier must be used to drive loudspeakers.
上一篇：金星C6458电源
下一篇：宽带热电偶DC变换电路
版权与免责声明
凡本网注明“出处：维库电子市场网”的所有作品，版权均属于维库电子市场网，转载请必须注明维库电子市场网，//tgdrjb.cn，违反者本网将追究相关法律责任。
本网转载并注明自其它出处的作品，目的在于传递更多信息，并不代表本网赞同其观点或证实其内容的真实性，不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时，必须保留本网注明的作品出处，并自负版权等法律责任。
如涉及作品内容、版权等问题，请在作品发表之日起一周内与本网联系，否则视为放弃相关权利。
